A new night photography gallery of the International Car Forest of the Last Church is available on my website. See giant school buses sticking nose first into the ground with long star trails behind them. Thanks to the artist Chad Sorg for creating this surreal, other-planetary space.
Earlier this year, I posted a full moon virtual tour of an abandoned cement plant. This full moon 360 is from another area of the plant. Use the white dots to link between panoramas in the tour.
I’ve used a variety of Nodal Ninja and RRS pano equipment over the last 6 years. I started with a Nodal Ninja 3 for shooting 360s, and also acquired a used RRS PCL-1 rotator and nodal slide for shooting single-row landscape panoramas. My 360 pano gear has evolved into 2 main setups:
- Really Right Stuff PG-02 Omni-Pivot head with 192 FAS nodal slide – for use on a tripod
- Nodal Ninja R1 ring mount panohead - for use with a Nodal Ninja carbon fiber pano pole
Panning Clamp, Ballhead Rotator, or Click-Stop Rotator
My main tripod is a Gitzo 3-series with a Markins ballhead — I’ve replaced the top clamp with the RRS PCL-1 panning clamp. I can quickly level the axis of rotation with the ballhead, and then rotate the PCL-1 for shooting panos. This setup is very strong and smooth, but is missing click-stops for high volume 360 work.
My secondary/travel tripod is a Gitzo 1-series with an Arca Swiss p0 ballhead. This setup offers the same flexibility as my main tripod, but without the handy laser etched degree indicators of the PCL-1. This works OK for the occasional 4-around pano, but isn’t ideal.
For high volume pano shooting, a click-stop rotator is a must. Shooting is much faster, and the precise positioning is great for using a stitching template in PTGui Pro. If I’m going to shoot a lot of panos, I’ll remove the ballhead and mount a Nodal Ninja EZ Leveller II with a RD4 rotator on top (the RD4 has been replaced by the RD5). I used a M6 male to 3/8″ male adapter to install an Arca Swiss style clamp on top of the rotator.
Mixing Nodal Ninja and RRS Pano Gear: Setup 1
Sometimes I won’t know if I want to shoot panos until I get to a location. Swapping out heads with my current setup can be a pain, so I was looking for more flexibility. I found a great article by Jon Witsell on using Nodal Ninja and RRS equipment together, and started digging around in my parts bin.
I added a RRS TH-DVTL-55 plate to the bottom of my Nodal Ninja rotator. The 3/8″-16 screw that came with the RRS dovetail plate was slightly too long. I sawed off one thread, added some Loctite 242, and secured the plate.
Now I can quickly switch to a click-stop rotator for shooting panos. The TH-DVTL-55 plate is a perfect fit for the PCL-1 panning clamp, which makes centering a breeze. The PCL-1 panning clamp can be also used to adjust the starting position of the pano. The knob on the PCL-1 can be aligned with one of the tripod legs, which is one less obstruction when stitching the nadir shot.
Mixing Nodal Ninja and RRS Pano Gear: Setup 2
The RRS pano head is smooth and sturdy, but also a bit heavy. Sometimes I want to use my Nodal Ninja R1 for packing light. I normally use the R1 on a pole with the Quick Mount Mini adapter. I had a RRS MPR-73 rail lying around, and bought an extra Quick Mount plate. The R1 head can be mounted directly to the MPR-73, and the screws sit inside the rail as an anti-twist mechanism. There is a very slight amount of play, but I had a better idea.
I also had a Nodal Ninja R1/R10 nadir adapter lying around. Using two 3/8″-16 to 1/4″-20 reducer bushings, I mounted the MPR-73 on the nadir adapter, and the quick mount plate on top. You can also get the MPR-73 rail with a 3/8″ screw.
Everything was installed with Loctite 242, and fit perfectly. The whole thing weighs 1 pound and barely takes up any room in my bag.
Installation note: While you can mount the quick mount plate on a 3/8″ stud (that would go in the empty hole on the nadir adapter above), it’s better to mount the plate as shown above. That way the anti-twist screws can be used to keep everything in alignment. The anti-twist screws also work when I swap the R1 over to my carbon pano pole.
Here’s the Arca Swiss compatible R1 mounted on a ballhead. Just level the head, and use the PCL-1 to rotate. I usually shoot 4-shots around with the R1, so not having click-stops isn’t too annoying.
I hope these ideas come in handy for those of you who are trying to mix Nodal Ninja and Really Right Stuff gear.
Stand-up comedy is like dance for me — I can’t watch 98% of what’s out there, but the 2% that’s good is really good. Doug Stanhope is in that 2%. His most recent 1-hour special is called Beer Hall Putsch [Netflix only], and it’s over the top. The Occupy Wall Street and NFL fantasy bits are nuts.
In 2004, Ewan McGregor and his friend Charley Boorman went on a 20,000 mile adventure on motorcycles in Long Way Round [Netflix | Amazon]. The series starts a bit slowly, but the hard travel segments in Russia and Mongolia are amazing. In 2007 they rode from Scotland to South Africa in Long Way Down [Netflix | Amazon].
The new Thomas Pynchon novel Bleeding Edge will be released on Tuesday, 9/17. The extensive 7,000 word piece on Pynchon published last month on Vulture is a must-read for fans of his work. And Jonathan Lethem’s review in today’s New York Times really nails what’s great about Pynchon.
The new CLUI publication Around the Bay: Man-Made Sites of Interest in the San Francisco Bay Region is essential if you live in the Bay Area. The book pairs aerial photographs with a short history of the industrial sites around the Bay. The companion exhibit, Above and Below, runs at the Oakland Museum runs through February 23, 2014. The big, projected fly-over video of the Bay is fantastic.
Jeff Jackson’s debut novel Mira Corpora is a dark, surreal coming-of-age story that I could not put down. Featuring a section with feral kids living in the woods on the edge of an abandoned amusement park which is down the way from a crumbling house inhabited by a teenage oracle.
I’m really surprised Rinko Kawauchi’s new book Ametsuchi isn’t getting more attention. I picked this up in a book store and was blown away. Images of controlled burns, constellations, Buddhist rituals, and a unique design with inverted versions of the images behind the pages. Here’s a video interview with Kawauchi with a look at the book. Highly recommended.
The Master Musicians of Bukkake are back with a new album called Far West which delves into prog-folk and Morricone inspired soundtrack music.
Ghost Capital is still blowin’ up the spot with a great selection of hard-to-find world, African, and electronic music.
Despite the crowds, riding a bike on the new Eastern span of the Bay Bridge is a lot of fun. Here’s how to get to the path.