1. After I arrived at SRL headquarters in Petaluma, CA, I spent some time walking around and looking at all of the amazing machines. Mark was working on a project near the table pictured above, and I set up the general framing without interrupting him.
Existing lighting was a mix of daylight and fluorescent. I turned off the fluorescent lighting to control color temperature. I set my exposure to have the room be a little bit dark.
Next, I set up a single Nikon SB-910 Speedlight on a stand to camera right, aimed at the ceiling. The ceiling was wood, which gave the light a warm tone. The Speedlight was used to light both Mark and the background.
I asked Mark to pose for a few minutes once everything was ready. I did a few quick lighting and exposure adjustments, made sure I had a few options by reviewing on the back of the camera, and then let Mark get back to work.
I really like the orange against green color palette of this shot, the hotspot on the screen in the background, and some of the supporting details like the calipers and WD-40.
Technical Details
Nikon D750 with 70-200mm f/2.8G VR II lens at 82mm
1/100, f/3.5, ISO 400
Nikon SB-910 Speedlight fired with a Pocket Wizard